MAINTENANCE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
• Keep the ventilation vents of the drill clean at all times, if possible, prevent
foreign matter from entering the vents.
•
Keep your router clean and in good repair for maximum performance and
machine longevity
.
• Before each use inspect the router table, router for loose screws,
misalignment, moving parts that are jammed, or any other conditions that may
affect the operation.
• If abnormal vibration or noise occurs, turn off the tool immediately and have
the problem corrected before further use. Do not use router until it is properly
repaired or replaced.
• See your Router Instruction Manual for router maintenance information and
instructions.
Cleaning
• Use only mild soap and a clean damp cloth to clean the router table. Certain
cleaning agents and solvents are harmful to plastic and other insulated parts.
• Do not use solvents to clean plastic parts. Many types of plastic may be
damaged by their use.
WARNING!:
TO AVOID FIRE OR TOXIC REACTION, DO
NOT USE PETROL, NAPHTHA, ACETONE, LACQUER
THINNER, OR SIMILAR HIGHLY VOLATILE SOLVENTS TO
CLEAN THE ROUTER TABLE.
Note: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the drill by an unauthorised person or by mishandling
of the drill.
SPARE PARTS
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
min¯
Revolutions or
reciprocation per minute
Regulator compliance mark
n
o
No load speed
Warning
Wear eye protection
Wear hearing protection
Wear breathing protection
Read instruction manual
WARNING!:
ALWAYS TURN OFF THE ROUTER TABLE
AND UNPLUG THE POWER CORD FROM THE POWER
SUPPLY BEFORE CLEANING OR CARRYING OUT ANY
MAINTENANCE PROCEDURE ON THE ROUTER TABLE OR
ROUTER.
Switch
Box SPRTB001-29
Tightening
Knob
SPRTB001-13
Tensioning
Knob
SPRTB001-08
Clear Guard
SPRBT001-05
Starting
Pin
SPRTB001-21
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito customer service
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]