ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. SANDING SHEET FITMENT
5. Dust Bag
6. Hook & Loop Sanding Sheet
7. Paper Punch Plate
ACCESSORIES
1 On/Off Switch
2 Hook & Loop Backing Pad
3
Sure Grip Handle
4
Spring Clamp
QUARTER SHEET SANDER
SETUP & PREPARATION
1. When fitting the sanding sheet, align the holes on the sheet with
the holes on the sanding pad.
Ensure the tool is disconnected from the power supply
before performing any of the following operations.
The holes on the bottom of the sanding pad allow the dust bag to
draw the sanding dust away from the work area.
3. Fold the sandpaper to
match the contours of
the sanding pad.
2. Unlock the spring clamp
on both sides of the
sander.
5. Feed the paper under
the clamp at the rear
of the sander. Lock the
clamp.
4. Feed the paper under
the clamp at the front
of the sander. Lock the
clamp.
Note:
Ensure the sanding sheet is firmly clamped and held flat
against the base of the sanding pad.