
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
CORDLESS LED TORCH
1
2
3
4
5
6
1 LED Light
2 Rotating Head
3 On/Off Switch
4 Sure Grip Handle
5 Battery Seating
6 Hanging Hook
Inserting & Removing the Battery
1 Align the ribs of the battery with the recess at the base of the torch and
push in until it clicks into place.
2 To remove, press and hold the battery release tab and pull the battery
away from torch.
a
b
Battery protection system
The tool is equipped with the battery protection system, which helps to ensure a long service
life.
The output power automatically cuts off during operation when the tool and/or battery are
placed under the following situations:
• When the tool is overloaded:
If this occurs, release the trigger switch and remove causes of overload, then pull the
switch trigger again to restart.
• When the remaining battery capacity becomes low:
Recharge the battery pack.
Note:
The battery protection system does not in any way damage the tool.
Note:
The indicated capacity may be lower than the actual level during use or immediately
after using the tool.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.