PXSPSDMS-0182
OPERATION
3. MOWING
1. Press and hold the lock-off
button.
3. Release the start/stop lever to stop
the mower.
Note:
For safety reasons, it is not
possible to start the mower if the pitch angle is over ~70
°
± 10
°
.
To prevent accidental start up, the mower is fitted with a dual action switch.
2. Pull the start/stop lever towards
the handle to start the mower
and then release the lock-off
button.
Switching On and Off
1
2
1
1
2
1
• While using your lawn mower always wear substantial closed, heavy
footwear, long trousers, eye and hearing protection.
• Make sure the lawn is clear of sticks, stones, wire and debris; they could
be thrown by the blade.
• Before using the lawn mower and after any impact, check for signs of
wear or damage and repair as necessary.
• Replace a worn or damaged blade together with the blade bolt to
preserve balance.
• Always ensure that a safe distance is maintained between the user and
the mower housing.
• Be especially careful when mowing and changing direction on slopes and
inclines. Maintain a solid footing.
• Always mow along the incline (not up and down). For safety reasons, the
lawn mower may not be used to mow inclines whose gradient exceeds
15 degrees.
• Use special caution when backing up and pulling the lawn mower.
Tripping hazard!
WARNING!
DO NOT MOW WITH POOR VISIBILITY
CONDITIONS, IN THE RAIN OR WHEN GRASS IS
WET.
Start mowing the edge of the
lawn and work along making
sure to overlap each pass by a
few centimetres.
When mowing long grass
be sure to not overload the
motor. First cut with the
highest cutting height and
then to the desired height.
This will help reduce the load.
Lawn Mowing Tips
Drive Unit
When the drive lever is pressed the
clutch for the drive will be closed and
the mower will start to move with the
motor running. Release the drive lever
in good time to stop the moving mower.
Practice starting and stopping before
you use the mower for the first time
until you are familiar with controlling
the mower.
Note:
The drive unit only operates if the motor is switched on. You
therefore have to start the motor each time.
Setting the Speed
The driving speed of the mower can be
adjusted to various different settings.
To do so, push the speed lever forward
until the desired speed is reached. If
the speed lever is in the fully forward
position in the driving direction, the
mower will move at maximum speed.
Note:
It is recommended to set the
speed to the length of the grass you
want to cut. The longer the grass, the slower the speed you should select.
Max. Speed
Min. Speed
