Attaching The Inflation Adaptors
A concentrator nozzle and narrow nozzle adaptor have been provided to suit
a variety of inflatables.
1. Align the slot on the adaptor with
the tab on the inflation port of
the tool.
2. Push the adaptor onto the inflation port.
3. Turn the adaptor anti-clockwise
to lock it in place.
4. The narrow nozzle can then be pushed
onto the adaptor if it is required.
Removing The Inflation Adaptor
1. Twist the inflation adaptor
clockwise to unlock it and then
pull it off the tool.
2. FITTING THE ADAPTORS
3. CONTROLS
OPERATION
a.
b.
Turning The Tool On/Off
1. Press the on/off trigger once to
start the tool.
Note:
The tool will automatically
lock-on and continue inflating even
if you let go of the trigger.
2. Press the on/off trigger again to stop the tool.
LED Worklight
The worklight automatically lights up when
the tool is started to help you see in low
light conditions (such as during camping).
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
