Ozito PXDDS-200 Скачать руководство пользователя страница 7

BATTERY AND CHARGER SAFETY WARNINGS

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR 

YOUR 
BATTERY CHARGER.

1. 

Before using the charger read all instructions and cautionary markings on the charger, battery 

pack and the product using the battery pack.

1. 

This charger is not intended for any uses other than charging rechargeable batteries. Any other 

use may result in risk of fire, electric shock or electrocution.

2. 

Do not place any object on top of the charger or place the charger on a soft surface that may 

result in excessive internal heat. Place the charger in a position away from any heat source.

3. 

To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when 

disconnecting the charger.

4. 

Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected 

to damage or stress.

5. 

An extension cord should not be used unless absolutely necessary. Use of an improper extension 

cord could result in the risk of fire, electric shock or electrocution.

6. 

Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in 

any way. Have it checked by an electrician or power tool repairer.

7. 

Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair 

is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

8. 

To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. 

Removing the battery pack will not reduce this risk.

9. 

Never attempt to connect 2 chargers together.

10. 

DO NOT store or use the tool and battery pack in locations where the temperature may reach or 

exceed 40ºC (such as inside sheds or metal buildings in summer).

11. 

The charger is designed to operate on standard household electrical power (240 volts). Do not 

attempt to use it on any other voltage!

12. 

The battery pack is not fully charged out of the carton. First read the safety instructions and then 

follow the charging notes and procedures.

13. 

The longest life and best performance can be obtained if the battery pack is charged when the 

air temperature is between 18 - 24ºC. Do not charge the battery pack in an air temperature below 

10ºC or above 40ºC. This is important and will prevent damage to the battery pack.

14. 

Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The 

battery can explode in a fire.

15. 

Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack 

breaks or cracks, immediately discontinue use and do not recharge.

16. 

During charging, the battery must be placed in a well ventilated area.

DESCRIPTION OF SYMBOLS

Warning 

Read instruction manual

 ø

 

    

Diameter

      

 

mA

     

Milliamperes    

Recycle battery 

 

 

 

Do not put in the rubbish

Polarity

Do not incinerate   

 

 

Do not get battery wet

Thermal cut-out protection

Transformer Energy

Rating (MEPS)

Double insulated 

/min     

Revolutions or reciprocation per minute

Ah 

   

Amp hour

Indoor use only

Lithium Ion battery

Do not use or store battery in 

temperatures exceeding 50ºC

   

Electrical Emissions 

Conformity (EMC)

     

Nm     

Newton Meters   

 

n

o      

No load speed

  

V

 

    

Volts

 

 

 

            

Hz

      

Hertz

ac/~

      

Alternating current 

            

W

 

    

Watts

  

    

Direct current

 

 

dc/

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk 

at your local Bunnings Warehouse. 
For further information, or any parts not listed here, visit 
www.ozito.com.au or contact Ozito Customer Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of 

with household waste but in an environmentally friendly way. Please 

recycle where facilities exist. Check with your local council authority for 

recycling advice.

Recycling packaging reduces the need for landfill and raw materials. 

Reuse of recycled material decreases pollution in the environment. 

Please recycle packaging where facilities exist. Check with your local 

council authority for recycling advice.

Содержание PXDDS-200











Отзывы: