manualshive.com logo in svg

Ozito PXCSDMS-018, Оригинальное руководство пользователя, Страница: 4 / 6

Поделиться
Скачать
Ozito PXCSDMS-018 Скачать руководство пользователя страница 4

3.  MOWING

OPERATION

1.   Open the battery cover. Slide two 

batteries of the same capacity 

and same charge state into the 

mower aligning the ribs so that 

they click into place.

1.   Press and hold the lock-off 

button.

3.   Release the start/stop lever to 

stop the mower.

To prevent accidental start up, the mower is fitted with a dual action switch.

1.   Open the battery cover. Press the 

battery release tab and remove 

the battery.

3.   Insert the safety key. 

(If the mower is not going to be 

used immediately, do not insert 

the safety key.)

2.   Pull the start/stop lever towards 

the handle to start the mower 

and then release the lock-off 

button.

2.   Close the battery cover.

2.   Close the battery cover.

Inserting the Batteries into the Mower

Switching On and Off

Removing the Batteries from the Mower

PXCSDMS-018

•   While using your lawn mower always wear substantial closed, heavy 

footwear and long trousers.

•   Make sure the lawn is clear of sticks, stones, wire and debris; they could 

be thrown by the blade.

•   Before using the lawn mower and after any impact, check for signs of 

wear or damage and repair as necessary.

•   Replace a worn or damaged blade together with the blade bolt to 

preserve balance.

IMPORTANT! 

DO NOT MOW WITH POOR VISIBILITY 

CONDITIONS, IN THE RAIN OR WHEN GRASS IS 
WET.

 Start mowing the edge of the 

lawn and work along making 

sure to overlap each pass by a 

few centimetres.

When mowing long grass 

be sure to not overload the 

motor.  First cut with the 

highest cutting height and 

then to the desired height. 

This will help reduce the load.

Lawn Mowing Tips 

Only use 2 batteries with the same capacity. For best performance use 3.0Ah 

batteries and above. Always use 2 batteries with the same charge state with 

the mower.

With the four battery mounts it is an option to install 2 additional batteries, 

this will increase the runtime of the mower. However, only use batteries with 

the same capacity in pairs. For example, 2 x 3.0Ah on one side, and 2 x 4.0ah 

on the opposite side. With four batteries installed, when the initial batteries 

are exhausted, the second set of batteries will be activated.

Rear Ejector

To use the rear ejector function you must open the ejector flap slightly and 

lock in place with the catcher flap locking lever.

1.   Lift up the grass catcher flap, 

swing up the locking lever and 

insert its foot into the recess on 

the mower housing.

Note:

 Do not use the mulching 

adaptor when the rear ejector is 

used.

Содержание PXCSDMS-018







Отзывы:

Нет отзывов