manualshive.com logo in svg

Ozito PXCPPS-018U, Оригинальное руководство пользователя, Страница: 5 / 8

Поделиться
Скачать
Ozito PXCPPS-018U Скачать руководство пользователя страница 5

PXCPPS-018U

5. INSERTING & REMOVING THE BATTERY

1.   Align the ribs of the battery with 

the recess below the handle

Removing a Battery from the Pole Pruner

2.   Slide the battery in so 

that it clicks into place.

1.   Press and hold the battery 

release tab to release the 

battery.

2.   Slide the battery out.

Installing a Battery into the Pole Pruner

2.   Wear the shoulder strap 

so that it lies over the left 

shoulder.

1.   Fasten to the shoulder strap 

holder on the main tube.

Adjusting the Pruner Head

1.   Press the two pivoting 

head releases, one each 

side and adjust the 

angle of the pruner head 

up or down to any of 7 

positions.

Lock Button

Lock Button

2.   The pruner head will lock 

onto the motor head and is 

then secured in place. 

1.   Pull the lock button to the 

right then rotate the pruner 

head 90

º

 clockwise 

Note:

  

The Lock Button will “CLICK” back to the left (original position) when 

the pruner head is correctly secured in place.

•

  Adjusting the Pruner Head 90º

Attaching the Shoulder Strap

•

  Pivoting the Pruner Head

Note:

  

Keep the pruner head 

pressed against the 

motor head when 

rotating.

Содержание PXCPPS-018U









Отзывы:

Нет отзывов