manualshive.com logo in svg

Ozito PXCPPHTC-418, Инструкция по эксплуатации, Страница: 3 / 16

Поделиться
Скачать
Ozito PXCPPHTC-418 Скачать руководство пользователя страница 3

2.  TENSIONING THE CHAIN

Note:

  

The Lock Button will “CLICK” back to the left (original position) when 

the pruner head is correctly secured in place.

3 - 4mm gap is 

the ideal tension

Fitting Pruner Head

1.   Align the pruner head and 

the motor head so the 

arrows on both coincide.

2.    (a) Press the pruner head 

against the motor head. 

This will cause the lock 

button to be pushed to the 

right.

    (b) Turn the pruner head 

clockwise. The pruner head 

will lock onto the motor 

head and is then secured 

in place. 

Lock Button

a

b

Note:

  

Only tighten the chain cover locking knob securely once the chain 

tension has been adjusted (see: Tensioning the chain.)

CAUTION:

 

THE CHAIN HAS SHARP EDGES. FOR YOUR 

OWN SAFETY, PLEASE WEAR WORK GLOVES.

IMPORTANT:

 

IF THE CHAIN IS INSTALLED BACKWARDS 

(CHAIN CUTTERS ARE FACING IN THE OPPOSITE 
DIRECTION OF ROTATION) THE POLE PRUNER WILL 
VIBRATE EXCESSIVELY AND NOT CUT.

Fitting Guide Bar & Chain

1.   Loosen  the 

chain cover 

lock and 

remove the 

side cover.

2.   Place the chain in the groove 

of the guide bar as shown. 

Refer to the image printed on 

the guide bar that indicates 

the direction that the chain 

should face.

Sprocket

3.   Place onto the mount, 

ensuring that the chain sits 

around the chain sprocket.

4   Re-mount and finger-tighten 

the side cover with the chain 

cover lock.

1.   Loosen the chain 

cover lock. Do not 

remove the side 

cover.

CAUTION:

 

IF YOU TRY TO ROTATE THE CHAIN TENSIONING 

ADJUSTMENT DIAL WHILST THE CHAIN COVER LOCK IS 
TIGHT, IT WILL RESULT IN THE CHAIN NOT LOOSENING 
AND POSSIBLE DAMAGE TO THE MECHANISM.

2.    Adjust the chain tension with 

the chain tensioning adjustment 

dial. Turning the dial CLOCKWISE 

increases the chain tension, 

turning it COUNTER-CLOCKWISE 

decreases the chain tension.

For the correct chain tension, firmly 

pull up on the chain at the middle 

of the top of the exposed guide bar. 

When the chain is pulled up to its 

highest point, the bottom tip of the 

links should only just stay in the track 

[middle of the guide bar]

CAUTION:

 

THE CHAIN HAS SHARP EDGES. FOR YOUR 

OWN SAFETY, PLEASE WEAR WORK GLOVES.

3.    After the chain has been 

accurately tensioned, lock the 

guide bar in place with the 

chain cover locking knob.

Note:

  

Proper tension of the chain is extremely important and must be 

checked before starting, as well as during any cutting operation. 

Taking the time to make adjustments to the chain will result in 

improved cutting performance and prolonged chain life. 

Содержание PXCPPHTC-418

















Отзывы:

Нет отзывов