4. CONTROLS & OPERATION
OPERATION
1 Press and hold
the lock-off switch
forward.
Switching On and Off
PXCLTS-018
CAUTION!
BEFORE YOU START THE UNIT, MAKE SURE THAT
THE GRASS TRIMMER IS NOT MAKING CONTACT WITH ANY
OBJECTS.
WARNING!
INSPECT THE AREA TO BE TRIMMED AND
REMOVE ANY WIRE, CORD OR STRING-LIKE OBJECTS
WHICH COULD BECOME ENTANGLED IN THE ROTATING
BLADE.
WARNING!
DO NOT OPERATE THE TRIMMER ON A TREE,
ON A LADDER, OR ON A SCAFFOLD, THIS IS EXTREMELY
DANGEROUS.
CAUTION!
BYSTANDERS MUST KEEP A MINIMUM SAFE
DISTANCE OF 10M AWAY FROM THE TRIMMER WHILE IT IS
OPERATING.
WARNING!
STONES, PIECES OF METAL AND OTHER
OBJECTS CAN BE THROWN OUT AT HIGH SPEED BY THE
BLADE.
2 Squeeze the on/off trigger
to start the trimmer.
3 To stop the trimmer,
release the on.off
trigger.
NOTE:
DO NOT CUT GRASS WHEN WET. (THE BEST RESULTS
ARE ACHIEVED ON DRY GRASS.)
1 Extend the edging guide
to prevent the cutting head
from getting too close to an
object such as a tree trunk
or wall.
2 Hold the trimmer with both
handles for best control
and balance.
3 To turn on squeeze the on/
off trigger whilst holding the
lock-off button down.
4 Move the grass trimmer
into the grass to allow it to
cut.
6 Release the on/off trigger
and allow the motor
to come to a complete
standstill.
5 Several passes will be
required to cut long grass.
Using the Grass Trimmer
1 Align the ribs of the battery
with the recess in below
the handle and slide in until
it clicks into place.
2 To remove, press and hold
the battery release tab and
then slide out.
Inserting & Removing the Battery (not included)
30°
