2. INSERTING & REMOVING THE BATTERY
OPERATION
1. Align the ribs of the battery
with the recess in below
the handle.
1. Press and hold the battery
release tab and slide the
battery out from the hedge
trimmer.
2. Slide the battery in so
that it clicks into place.
Inserting the Battery Pack
Removing the Battery Pack
PRESS
PRESS
PRESS
WARNING!
DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
Front Handle
1. Place the front handle in position
on the hedge trimmer. Ensure the
handle lock is positioned on the
right-hand side as the electrical
contacts are connected correctly.
HOLD
CLOSED
HOLD
CLOSED
2. Fit the screw in place and
tighten securely while
holding the handle lock in the
closed position.
Note:
Only tighten the
screw with the handle lock in
the closed position otherwise
adjusting the front handle will
not be possible.
3. To adjust the front handle
position, open the lock to loosen.
Adjust into the desired position,
close the lock to hold in desired
position.
Note:
Ensure the front handle
lock is fully closed after making
adjustment otherwise the motor will
not start.
