background image

1.  CHARGING A DEVICE

2.  MAINTENANCE

•   Disconnect the charger from power source before cleaning.
•  Keep the charger in a dry place out of reach of children.
•   If the enclosure of the charger requires cleaning, do not use solvents. Use a dry, soft 

cloth only to wipe down the surface. Never let any liquid get inside the charger; never 

immerse any part of the charger.

•   There are no other parts inside the charger which require maintenance. Do not 

take the charger apart. If the charger is damaged, contact your supplier or the 

manufacturer.

OZITO 

Australia/New Zealand (Head Office)

 

25 Fox Drive, Dandenong South, Victoria, Australia 3175.

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU 

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS 

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO 

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE 

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL 

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER 

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND 

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE 

WARRANTY POLICY OR PROCEDURE.

The benefits provided under this warranty are in addition to other rights and 

remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are 

entitled to a replacement or refund for a major failure and for compensation 

for any other reasonably foreseeable loss or damage. You are also entitled to 

have the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure. 
Generally you will be responsible for all costs associated with a claim under 

this warranty, however, where you have suffered any additional direct loss as 

a result of a defective product you may be able to claim such expenses by 

contacting our customer service helpline above.

36 MONTH REPLACEMENT WARRANTY

Your product is guaranteed for a period of 

36 months from the original date 

of purchase

 and is intended for DIY (Do It Yourself) use only. If a product is 

defective it will be replaced in accordance with the terms of this warranty. 

Warranty excludes consumable parts.

WARNING

The following actions will result in the warranty being void.

•   If the tool has been operated on a supply voltage other than that specified 

on the tool.

•   If the tool shows signs of damage or defects caused by or resulting from 

abuse, accidents or alterations.

•   Failure to perform maintenance as set out within the instruction manual.
•   If the tool is disassembled or tampered with in any way.

PXCG-USB

1221

ONLINE MANUAL

Scan this QR Code with your 

mobile device to take you to the 

online manual.

Connecting USB Power Station to battery pack

Connecting USB device to USB Power Station

1  Connect the device to be charged via 

USB cord to the USB Power Station 

outlet.

4   To remove, push the on/off 

switch into the off position, then 

press the battery release tab and 

slide the USB Power Station from 

its position.

Note:

 

For best results ensure the battery is fully charged.

Note:

 

If no device is connected, the USB Power Station will turn off. The red 

LED light will no longer be illuminated.

3   The LED will illuminate red 

showing power is being supplied 

to the USB Power Station.

2   Push the On/Off button to turn on

1   With the battery sitting on a flat 

surface, align the raised ribs on 

the battery with the recess in the 

charger and slide onto the battery 

ensuring a firm connection.

Отзывы: