ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
11. Safety Key
12. Cable Clip x 3
13. Nut x 4
14. Upper Handle Knob x 2
15. Round Head Bolt-Short x 2
16. Round Head Bolt-Long x 2
17. Spanner
18. CSK Head Bolt x 2
1. Battery Cover
2. Grass Catcher Flap
3. Lower Handle
4. Safety Switch
5. Start/Stop Lever
6. Sure Grip
7. Drive Lever
8. Top Handle
9. Grass Catcher
10. Cutting Deck
SELF-PROPELLED LAWN MOWER
KNOW YOUR PRODUCT
1
9
2
10
3
15
4
12
5
6
7
8
11
1. ASSEMBLY
SETUP & PREPARATION
1. Place the lower handle over the
outside of the mower handle
brackets aligning the upper holes in
the handle and each bracket. Fit the
CSK bolt through mounting brackets
then through hole in each side of
lower handle.
Fitting the Lower Handle
WARNING!
ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
ACCESSORIES
2. There are three holes remaining
in each bracket, select the
appropriate hole for the height of
the user.
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the Ozito
Power X Change Range.
Fitting the Upper Handle
1. Place the upper handle over
the lower handle. Fit long
round head bolts through
the lower handle and then
through the upper handle.
3. Fit the short round head bolt
through the brackets and then
through the lower handle. Secure
each bolt with the 4 nuts and
spanner provided.
2. Secure knobs over
the protruding ends
of the bolts.
13 14
16 17 18
