Water supply
For use only with mains pressure water
when a backflow preventer is
installed on the inlet of the pressure washer. For further information
contact Ozito Customer Service.
1. Run water through
your garden hose
to remove any
foreign matter before
attaching to the pump
2. Attach garden hose
(min.Ø 1/2”) to the
water inlet connector
on the pump. Always
use a reinforced
hose with a standard
coupling for water
inlet. The hose should
be at least 6m in
length for proper
operation.
Note:
A filter is fitted to the inlet connector preventing any debris
from entering the pump. Inspect and clean the filter before use as
insufficient water supply could damage the pump.
2. CONNECTIONS
Gun and lance
1. Fasten the
lance to
the gun by
pushing and
twisting.
Quick connect system
The connections of the accessories are attached with a quick
connection system.
1. To Connect, push the
accessory onto the lance
connection.
High pressure hose
1. Connect the high pressure hose to
the gun.
2. Connect the opposite end of the high
pressure hose to the high pressure
cleaner
2. To remove, actuate the
quick connection system
and remove the accessory
