ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Float Switch Cable
2. Float Switch Adjustor
3. Float Switch
4. Pump Housing
5. Suction Base
6. Outlet
7. Handle
SUBMERSIBLE PUMP
KNOW YOUR PRODUCT
1. UNIVERSAL ADAPTOR
Preparing the Universal Adaptor
The universal adaptor is designed to fit various sizes of pipes and
fittings.
8. L-Shape Connector
9. Universal Adaptor
10. 20m Nylon Lowering Rope
11.
Ø
25mm x 10m Lay Flat Hose
12.
Ø
25mm Stainless Hose Clamp
ACCESSORIES
SETUP & PREPARATION
To fit a 25mm (1’’) tap adaptor
(temporary application only)
1. Cut the universal adaptor using
a hack saw. Ensure all flashing is
removed.
2. It is now ready to be fitted with a
25mm (1’’) screw on tap adaptor
(not included).
To fit a 32mm (1¼’’)
rigid pipe or flexible tubing
(Temporary or permanent application)
. Cut the universal adaptor using
a hack saw. It is now ready to be
fitted with a 32mm (1¼’’) rigid pipe
or flexible tubing (not included).
NOTE:
TO USE THE PUMP IN PERMANENT
INSTALLATIONS WITH RIGID PIPES, INSTALL A
NON-RETURN VALVE TO AVOID THE FLUID BEING
RE-CIRCULATED ONCE THE PUMP HAS STOPPED.
10
11 12
WARNING!:
ENSURE THE PUMP IS
DISCONNECTED FROM THE POWER
SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
To fit a 25mm (1’’) Lay flat hose or
flexible tubing
No cutting of the universal adaptor
is required. It is ready to be fitted
with the 25mm (1’’) Lay flat hose
or flexible tubing (not included).
