CHAINSAW CUTTING STAND SAFETY WARNINGS
GENERAL SAFETY WARNINGS
WARNING!
This appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction.
Young children should be supervised to ensure that they do not play with the appliance.
• Ensure to wear safety gloves and all other essential safety equipment when working on the chainsaw cutting stand!
It is also imperative to follow the safety instructions issued with the chainsaw!
• Take care that you do not injure yourself on sharp corners or edges.
• Place the chainsaw cutting stand on a level, non-slip surface.
• Do not overload the chainsaw cutting stand (max. 150 kg, Ø 200 - 250mm).
• The wood you want to saw must always rest securely on the chainsaw cutting stand.
• The wood you want to saw is allowed to project beyond the chainsaw cutting stand only to the point where tipping
is impossible.
• Be aware of overbalancing. When a large piece is cut from one end of a job, the remaining piece may be heavy
enough to over-balance the chainsaw cutting stand
• Each time before use, check that all screws are securely and correctly fastened.
• Keep work areas clean. Cluttered work areas can cause accidents.
• Consider work area environment. Keep the work area well lit.
• Do not overreach. Keep proper footing and balance at all times.
• The Chainsaw Cutting Stand must be used only for its prescribed purpose. Any use other than those mentioned in
these instructions will be considered a case of misuse. The manufacturer shall not be liable for any damage or injury
resulting from such cases of misuse.
• The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such
changes.
• Do not force the saw into the cut. Apply only light pressure whilst running the chain.
• While cutting, always – Position your body to the left of the chainsaw so if it kicks back uncontrollably, it goes over
your right shoulder, never stand in the cutting line of the saw.
1. Keep work areas clean.
Cluttered work areas can cause accidents.
2. Consider work area environment.
Keep the work area well lit.
3. Keep children away.
Do not allow children, visitors or animals to come near the work area.
4. Do not overreach.
Keep proper footing and balance at all times.
5. Stay alert
. Watch what you are doing. Use common sense. Do not operate a saw mounted to the stand when you
are tired.
6. Users.
This appliance is not intended for use by person (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.