Ozito OZHD1050WA Скачать руководство пользователя страница 6

6

GENERAL SAFETY (cont.)

f)

Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.

Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used.

Use of these

devices can reduce dust related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power tool for your

application.

The correct power tool will do the job better and safer at the rate

for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off.

Any

power tool that can not be controlled with the switch is dangerous and must 
be repaired.

c) Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing power tools.

Such preventive

safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools, unplugged & out of the reach of children and do not

allow persons unfamiliar with the power tool or these instructions to operate
the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use.

Many

accidents are caused by poorly maintained power tools.

f)

Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in accordance with

these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work to
be performed.

Use of the power tool for operations different from intended

could result in a hazardous situation.

h) This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and
knowledge,

unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

i)

Children should be supervised to ensure that they do not play with the appliance.

5) SERVICE

a) Have your power tool serviced by a qualified repair person using only

identical replacement parts.

This will ensure that the safety of the power tool 

is maintained.

b) Recommendations for the use of a residual current device

with a rated

residual current of 30mA or less.

c) If the supply cord is damaged,

it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание OZHD1050WA












Отзывы: