TOOL OPERATION (cont.)
10
Bevel Adjustment
Disconnect plug from power source. The baseplate (16) can be adjusted up to 45º by
loosening the bevel adjustment knob (10) at the front of the saw. Align to desired
angle on calibrated bevel scale (7). Then tighten bevel adjustment knob (10).
Because of the increased amount of blade engagement in the work and decreased
stability of the baseplate (16), blade binding may occur. Keep the saw steady and the
baseplate (16) firmly on the work piece.
Line Guide
For a straight 90º cut, use the cutting guide notch (11a) in the baseplate (16). For 45º
bevel cuts, use cutting guide notch (11b). The cutting guide notch will give an
approximate line of cut. Make sample cuts in scrap timber to verify actual line of cut.
This will be helpful because of the number of different blade types and thicknesses
available. To ensure minimum splintering on the good side of the material to be cut,
face the good side down.
Switch
Warning!
When starting the circular saw, hold it securely with both hands.
The torque from the motor can cause the tool to twist.
To turn the tool “ON”, depress the lock-off button (2) and squeeze the on/off switch (1).
To turn the tool “OFF”, release the on/off switch (1), which is spring loaded and will
return to “OFF” automatically.
Your saw should be running at full speed BEFORE starting the cut and turned off
only AFTER completing the cut. To increase switch life, do not run switch on and off
while cutting.
General Cuts
Always hold the soft grip handle (21) with one hand and the front handle (3) with
the other.
Warning!
Always make sure either hand does not interfere with the free
movement of the lower blade guard (12).
Maintain a firm grip and operate the on/off switch (1) with a positive action.
Never force the saw. Use light and continuous pressure.
Warning!
After completing a cut and the on/off switch (1) has been released,
be aware of the necessary time it takes for the blade to come to a complete
stop during coast down. Do not allow the saw to brush against your leg or
side, since the lower guard is retractable, it could catch on your clothing and
expose the blade. Be aware of the necessary blade exposure that exist in
both the upper and lower blade guard areas.
!!
!!
!!
Содержание OZCS1200WA
Страница 1: ......
