GENERAL (cont.)
6
17. Do not abuse the cord.
Never carry the tool by its cord or pull it to disconnect
from the socket. Keep the cord away from heat, oil and sharp edges.
18. Store idle tools.
When not in use, tools should be stored in a dry, locked up or
high place, out of reach of children.
19. Maintain tools with care.
Keep cutting tools sharp and clean for better and safer
performance. Follow the instructions for maintenance and changing accessories.
Keep handles and switches dry, clean and free from oil and grease.
20. Have your tool repaired by an electrician or power tool repairer.
This power
tool complies with relevant safety requirements. To avoid danger, electrical
appliances must only be repaired by qualified technicians using original spare parts;
otherwise this may result in considerable danger to the user.
21. Users.
This appliance is not intended for use by young children or infirmed
persons without supervision. Young children should be supervised to ensure that they
do not play with this appliance.
22. Replacement of the supply cord.
If the supply cord is damaged, it must be
replaced by an electrician or a power tool repairer in order to avoid a hazard.
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS
FOR YOUR BATTERY CHARGER.
•
Before using the charger, read all instructions and cautionary markings on charger,
battery pack and product using the battery pack.
Danger!
If the battery pack case is cracked or damaged, do not insert into
charger. There is a danger of electric shock or electrocution.
Warning!
Don’t allow any liquid to get inside charger. Electric shock may
result. To facilitate cooling of the battery pack after use, avoid placing the
charger or battery pack in a warm environment such as in a metal shed, or an
uninsulated trailer.
•
This charger is not intended for any uses other than charging rechargeable
batteries. Any other use may result in risk of fire, electric shock or electrocution.
•
Do not place any object on top of the charger or place the charger on a soft
surface that may result in excessive internal heat. Place the charger in a position
away from any heat source.
•
To reduce risk of damage to the electric plug and cord, pull by the plug rather
than the cord when disconnecting the charger.
•
Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
CHARGER AND BATTERY PACK SAFETY INSTRUCTIONS
!!
!!
