ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Front Handle
2 Metal Base Plate
3 Spring Clamp
4 On/Off Switch
5 Rear Handle
6 Dust Canister
ORBITAL SANDER
KNOW YOUR PRODUCT
1. ATTACHING SANDPAPER
SETUP & PREPARATION
Ensure the tool is disconnected from the power supply
before performing any of the following operations.
2. Fold the sandpaper to match the contours of the sanding pad.
1. Unlock the spring clamp on both sides of the sander.
4. Feed the paper under
the paper clip at the rear
of the sander. Lock the
clamp.
3. Feed the paper under
the paper clip at the
front of the sander. Lock
the clamp.
Note:
Ensure the sanding sheet is firmly clamped and held flat
against the base of the sanding pad.
7 Sandpaper x 3 (60 / 80/ 120 Grit)
ACCESSORIES