ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1 Universal Blade
2 Front Handle
3 Variable Speed Dial
4 Safety Lock-off Switch
5 On/off Trigger
6 Rear Handle with Sure Grip
7 Spare Brushes
8 Hex Key
9 Metal Blade
10 Scrolling Blade
11 General Purpose Blade
1. FITTING BLADES
1. Insert the hex key into the blade locking screw. Turn anti-
clockwise to loosen the screw but do not remove it completely.
2. Insert the blade. Locate the hole in the blade over the
retaining pin and between the clamping plate and holder
shaft.
ACCESSORIES
SETUP & PREPARATION
MULTIPURPOSE SAW
Before you make any adjustments, make sure the power cord
is disconnected from the electricity supply.
3. Tighten the blade locking screw with the hex key.
Note: Periodically check that the blade is properly secured.