HVLP – HIGH VOLUME LOW PRESSURE
Traditional spray guns require a compressor to spray with a constant pressure.
Normal electric spray guns have an electromagnetic plunger to spray paint; the
disadvantage of this is that there is no constant spray. The spray is actually
pulsating. The HVLP electric spray gun has a powerful fan rather than a compressor.
The fan provides a high volume of air with low pressure, resulting in a constant
spray without the assistance of a compressor.
Explanation Of The System
The device works according to low-pressure spraying technique. A high volume of
air surround the spray jet being ejected under low pressure. The air cap provides a
very fine atomization with the lowest of spray mist .The coating material is applied
to the object quickly and exactly. The air flow shortens the drying time for the
coating material this gives perfect spraying result with a saving of coating material
and is therefore good for the environment.
Function Description
The motor blower produces a flow of air which flows through the air hose to the
spray gun. The air flow atomizes the coating material at the nozzle and also
pressurizes the container. This pressure pushes the coating material up the
ascending pipe to the nozzle. The air and pressure setting can be adjusted
progressively.
Note:
For obtaining the best results from your spray gun, surface preparation and
paint thinning are the two most important areas with which to be concerned.
Ensure all surfaces are free from dust, dirt and grease. Masking is important to
ensure you do not spray those areas you wish to remain untouched. Make sure
paint is thoroughly mixed.
Important – Selecting Paint
Although a large number of paints and materials can be sprayed, some cannot.
Please check manufacturer’s recommendation before purchasing paint. If the paint
can refers to brush application only it cannot be sprayed.
Materials Which Can Be Used
Suitable for a range of oil and water based products recommended for spray
application, including paint, varnish, stains and wood preservatives.
Materials Which Cannot Be Used
THE SPRAY GUN CANNOT BE USED FOR PAINTS SUCH AS EXTERIOR TEXTURED
WALL PAINTS, MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,
DISPERSION PAINTS, CAUSTIC AND ALKALINE SUBSTANCES OR TEXTURED
COATINGS. TO OBTAIN THE BEST RESULTS FROM YOUR SPRAY GUN, PLEASE
READ THE INSTRUCTIONS CAREFULLY BEFORE USE.
PREPARATION
7
Содержание MPS-700
Страница 1: ......
