1. Loosen the Telescopic
Shaft Collar by rotating in
a clockwise direction.
2. Adjust the Telescopic
Shaft up or down to the
appropriate height.
2. ADJUSTMENTS
3. CORD RETAINER
Adjusting the Working Height
1. Make a loop with the
extension cord and push it
through the hole under the
on/off trigger.
2 Place the loop onto the
cord retainer and ensure it
is pulled firmly into place.
NOTE:
TO AVOID THE EXTENSION CORD FROM DETACHING;
ALWAYS CHECK THAT THE EXTENSION CORD IS ATTACHED TO
THE CORD RETAINER BEFORE USE.
Using the Cord Retainer
1. Depress the Head Angle
Release Button.
2. Move the Telescopic Shaft
into the desired position
and release the Button.
Adjusting the Cutter Head Angle
3. Tighten the Telescopic Shaft Collar once adjustment is
complete.
Rotating the Cutting Head
1. Pull the Rotating Head
Collar and turn the
Telescopic shaft 180º ant-
clockwise.
Note:
The head will only
rotate in one direction.
2. Release the Collar to lock
in place.
3. Connect the extension cord
socket to the line trimmer
power cord.
