Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your local
council authority for recycling advice.
MAINTENANCE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
TROUBLESHOOTING
Note:
The LED light is not replaceable.
•
When not in use, the tool should be stored in a dry, frost free
location, keep out of children’s reach.
•
If the housing of the tool requires cleaning, do not use solvents
but cloth only.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by repair of the tool by an unauthorised person or by
mishandling of the tool.
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
Laser does not turn on
The batteries may be depleted. Ensure you have inserted 2 x AAA
batteries with a full charge.
Make sure the batteries are in the correct direction as indicated by the
engraving on the bottom plate inside the battery compartment.
The laser line is very small
The back of the laser unit must be placed against a wall for the laser line
to project along the wall.
Warning
Read instruction manual
mW Milliwatt
Laser Light Laser Radiation
V
Volts
W
Watts
Direct current
dc/
Do not put in the rubbish
Regulatory Compliance Mark
(RCM)
Indoor use only