ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. BATTERY
1 Drive Bit Retaining Ring
2 LED Light
3 Variable Speed Trigger
4 Forward/ Reverse Lever
5 Battery 18V
6 Battery Release Button
CORDLESS IMPACT DRIVER
Installing and Removing
Slide the battery into the
impact driver base until it clicks
into place.
This charger is recommended for use with a residual current
device with a rated residual current of 30mA or less.
Charging
Hold down the battery release
buttons and slide the battery
out.
7 Charging Jack
8 Charging Adaptor
9 Charging Cradle
10 Sockets (Hex Drive) x 4
Battery Indicator
1. Depress the battery
indicator button.
2. Observe which lights illuminate for a reading on your battery’s
charge.
Charged
Flat
Low Charge
2. Slide cradle onto the
battery. Only the red light will
be illuminated when properly
connected and charging.
1. Plug charging jack into
charging cradle. Both
lights will illuminate when
connected.
Note:
Once fully charged, both the red and green lights will
illuminate.
