ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. BATTERY
1 Locking Collar
2 Accessory Holder
3 Battery Release Button
4 On/off Trigger
5 Lock-off Button
6 12V Battery
7 Air Pressure Gauge
CORDLESS AIR PUMP
Installing and Removing
2. Insert battery into the
charging cradle. Both lights
will illuminate when properly
connected and charging.
Insert the battery into the base
of the air pump until it clicks
into place.
This charger is recommended for use with a residual current
device with a rated residual current of 30mA or less.
1. Plug charging jack into
charging cradle. The green
light will illuminate when
connected.
Charging
Depress the battery release
button and pull the battery out.
9 Charging Jack
10 Charging Adaptor
11 Charging Cradle
12 Ball Adaptor
13 General Inflating Adaptor
14 Bicycle Adaptor
15 Flexible Extension Hose
3. Once fully charged,
the green light only will
illuminate.