6. CONTROLS CONTINUED
7. CUTTING
The worklight will illuminate the path in front of the jigsaw to help you
see the cutting path.
The jigsaw features a blower function that allows air from the internal
fan to flow out of a vent, pushing away dust from the cutting path
making it easier for you to follow a cutting line.
1 Rotate the blower switch anti-
clockwise to enable the blower
function.
2 Rotate the blower switch
clockwise to disable the blower
function.
Turning on the Worklight
Blower Function
JSW-8100
2 Mark your cutting line with a
pencil or attach the parallel
guide.
4 Hold the jigsaw firmly ensuring
that your hands cannot slip
down onto the blade and start
the jigsaw by depressing the
on/off switch.
3
2
1
1 Ensure the correct
blade is inserted into
the blade lock and is
secure.
3 Place the base onto
the workpiece with
the blade away from
the edge.
5 Move jigsaw forward
with light pressure.
Allow the blade to
stop before lifting the
jigsaw away.
3
2
1
3
2
1
3
2
1
1 To turn the worklight on, press the
worklight switch in.
2 To turn the worklight of, press the
worklight switch again.
3
2
1
CAUTION!
ENSURE HANDS AND FINGERS ARE KEPT
WELL AWAY FROM THE BLADE AND THE CUTTING
PATH AT ALL TIMES TO AVOID INJURIES.
