Ozito HTL-072, Инструкция по эксплуатации, Страница: 11 / 16

FITTING/CHANGING BLADES (cont.)
10
To remove a blade
1. Turn the Hedge/Grass Trimmer upside down holding in
one hand on a hard surface. Gently lift the tab of the
blade cover (9) and slide back until the blade cover (9)
can be removed (Fig. 5).
2. Remove the blade gently by lifting the end tip of the
blade off the Hedge/Grass Trimmer unit (Fig. 10).
3. Follow steps 2 - 6 to secure the blade.
Initial Operation
1. Push the safety lock-off switch (4) forward, whilst holding
the lock-off switch forward depress the on/off (5) to start
operation. Once the trigger switch (5) is engaged you
can release the safety lock-off switch (4) (Fig. 11).
The safety lock-off switch reduces the risk of accidental starting.
To stop the Hedge/grass Trimmer release the on/off trigger switch (6) (Fig. 11).
• Do not force the blades through dense growth. If the blades slow down, then
reduce your pace. Should the blades jam, release the trigger immediately. Do not
use fingers to free up jammed blades. Jammed blades can release suddenly
causing serious injury.
• Never touch the blade rail while in operation and be aware of sharp edges even
when the Hedge/Grass Trimmer is not in use.
• Always ensure you are securely balanced with a free work area before switching on
the Hedge/Grass Trimmer.
Note: The yellow low charge indicator LED (Fig. 2 (7)) will be illuminated when
the battery is running low and requires charging.
G
Fig. 11
Fig. 10
OPERATION