Ozito Industries will not be responsible for any damage or
injuries caused by repair of the tool by an unauthorised
person or mishandling or mistreatment of the tool. This
tool is designed for Domestic Home Use only. Use in
commercial or industrial environments will void the
warranty.
CAUTION!:
ALWAYS HANDLE THE BLADE WITH CARE
– SHARP EDGES COULD CAUSE SERIOUS INJURY.
USE GLOVES.
MAINTENANCE
WARNING!:
BEFORE CLEANING YOUR ELECTRIC
MOWER OR CARRYING OUT ANY MAINTENANCE
PROCEDURE, MAKE SURE THAT THE MOTOR IS OFF
AND THE TOOL DISCONNECTED FROM THE POWER
SUPPLY TO PREVENT ACCIDENTAL STARTING.
Removing the Blade
1.
To remove the blade bolt,
hold the blade firmly and
with a 13mm socket (not
supplied) loosen the blade
bolt by turning it anti-
clockwise.
Note:
A piece of timber will
assist in holding the blade
while removing or tightening
the blade bolt.
2. Remove the blade bolt and blade.
3. Inspect for damage and clean as necessary.
Replace the metal blade after 50 hours mowing or 2 years
whichever is the sooner – regardless of condition. If the
blade is cracked or damaged replace it with a new one.
Never use a blade bolt if the insulated head is damaged,
cracked or missing.
TIMBER
Fitting the Blade
•
Keep all nuts, bolts and screws tight to be sure the lawn mower is in a safe
working condition.
• Check the catcher frequently for wear or deterioration.
• Replace worn or damaged parts for safety.
•
Only use the replacement blade, blade bolt, and impeller specified for this
product.
• Be careful during adjustments of the lawn mower to prevent entrapment of
the fingers between moving blade and fixed parts of the machine.
• Oil the wheel pins.
•
When not in use, the mower should be stored in a dry, frost-free location, out
of reach of children. If the housing of the mower requires cleaning, do not
use solvents but a moist soft cloth and brush only.
•
Frequently check the wheel threads are firm and tight.
V
Volts
Hz
~
Alternating current
W
/min
Revolutions or
reciprocation per minute
n
o
Warning
Read instruction manual
Caution: Wear ear protection
and safety goggles
Keep bystanders away. Do not mow whilst people especially
children or pets are in the mowing area.
Double insulated
Do not use on steep slopes.
Keep extension cord
away from cutting blades.
Always keep the lawnmower on the ground when mowing.
Tilting or lifting the lawnmower may cause stones to be thrown out.
Beware of severing toes or hands. Do not put hands or feet near
a rotating blade.
Risk of cut injuries.
Caution: rotating blades
Switch Off! Remove plug from mains before adjusting, cleaning or if
cable is entangled or damaged. Keep the cable away from the blade.
Don’t use with rear flap open.
Make sure the lawn is clear of sticks, stones, wire and debris;
they could be thrown by the blade.
96
Sound power level
Do not mow in the rain or
leave the lawn mower outdors
while raining.
Hertz
Watts
No load speed
Regulator compliance mark
CAUTION!:
DO NOT TOUCH ROTATING BLADES.
DESCRIPTION OF SYMBOLS
1. Fit the blade to the fan with the tilt edges of the blade facing
towards the mower, ensuring the blade is located onto the
fan location lugs correctly.
2. Re-assemble blade bolt through blade and fan.
3.
Hold the blade firmly and tighten blade bolt with a (not
supplied), by turning in a clockwise direction. Do not over
tighten.
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed
of with household waste but in an environmentally friendly way.
Please recycle where facilities exist. Check with your local
council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in the
environment. Please recycle packaging where facilities exist.
Check with your local council authority for recycling advice.
Limited spare parts are available subject to availability. Please
contact your local Bunnings Special Orders Desk to order the
required spare parts.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
