
2. ASSEMBLY
3. CONTROLS
OPERATION
Attaching Sandpaper
1. Align the sanding sheet with the sanding pad and press on.
2. Replace the sanding sheet when it is worn.
1. Push the dust canister into dust extraction port until it clicks into
place.
Fitting the Dust Canister
1. To turn on, press the on/off switch. To turn off, press the on/off
switch again.
On / Off Switch
2. To remove, squeeze the tabs on the side of dust canister and pull
away from the dust extraction port.
Note:
For optimum dust extraction, empty when dust canister is
1/3 full.
Note:
Ensure the sander is turned off before removing the
battery. Do not touch the on/off button while the battery is
removed. If the On/off button is activated, when we insert the
battery it will automatically start.