8
CUT SAW SAFETY WARNINGS! (cont.)
!!
!!
LITHIUM ION BATTERY AND CHARGER SAFETY FEATURES
•
Watch out for cut-off portions of the work piece being cut. They may fall and
cause injury to you or someone near you.
•
When cutting metals, be cautious of hot flying debris.
•
Do not touch the blade or the work piece immediately after operation; they may
be extremely hot and could potentially burn your skin.
•
If you withdraw the blade from the work piece during operation, a strong reaction
could be produced, which could cause the blade to snap or cause you to lose
your grip and/or control of the saw. Always switch off the tool and wait until the
blade has come to a complete stop before withdrawing the blade from the work piece.
WARNING!
Some dust created by sawing activities contain chemicals
known to cause cancer and other respiratory harm. Wear dust masks
designed for protection against dust and fumes.
Over Charging Protection
This feature ensures that the battery (6) is never overcharged. When the battery (6) has
reached its full charge capacity the charger will shut off protecting the internal
components of the battery (6) from being damaged.
Over Discharge Protection
The battery (6) includes an over discharge protector. This feature stops the battery (6)
from discharging beyond the recommended lowest safety voltage.
Over Heat Protection
The battery (6) has an internal thermal cut-out device that stops the charging cycle if
the battery (6) becomes hot during the charging process. This thermal cut-out device
also stops the battery (6) from operating should the battery (6) become too hot during
the operation of the tool. This can happen when the tool is overloaded or being used
for extended periods of time.
Up to 30 minutes cooling time may be required depending on ambient temperature
and the operation being performed.
Over Current Protection
If the battery (6) is overloaded and the maximum current draw is exceeded the battery
will temporarily stop working to protect the internal components. The battery (6) will
resume normal operation once the current draw has returned to its normal safe level.
This may take a few seconds.
Short Circuit Protection
If the battery (6) short circuits, the short circuit protector immediately stops the battery
(6) from operating.
This ensures that no internal components of the battery (6) or tool are damaged.
Содержание CSL-018
Страница 1: ......
