Fitting the Safety Shield Bracket
1. Position the safety shield bracket
in front of the wheel guard cover,
aligning the slots on the safety shield
bracket with the holes of the wheel
guard cover.
2. Attach the safety shield bracket to the
wheel guard cover by screwing the
safety shield adjusting screws with the
spring washers and the washers, to
the nuts.
3. Position the safety shield bracket so
that the distance between the grinding
wheel and the safety shield bracket
is as small as possible and does not
exceed 2 mm.
4. Hold the nuts at the rear of the safety
shield bracket in place with a spanner
(not supplied), while tightening
the front adjusting screw with a
screwdriver (not supplied).
NOTE:
Adjust the safety shield bracket
periodically to compensate for wear
on the wheel.
Fitting the Safety Eye Shield
1. Position the safety eye shield between
the vertical braces at the top of the
safety shield bracket.
2. Insert a long screw through
a washer, then through
the bracket and safety eye
shield (screws and washers
supplied).
3. Fasten the assembly in place
with a nut (supplied).
4. Hold the nut in place with a spanner
(not supplied), while tightening
the screw with a screwdriver (not
supplied). Do not overtighten.
2 mm
Max.
WARNING!
ALL COVERS AND SAFETY DEVICES
HAVE TO BE PROPERLY FITTED BEFORE THE BENCH
GRINDER & BELT SANDER IS SWITCHED ON