AGM-5100
4. ON/OFF SWITCH
5. GRINDING & CUTTING
1. Ensure the workpiece is
securely held down.
2. Turn on the
angle grinder.
a
b
10-15°
a
b
OPERATION
The tool is recommended for use with a residual current device
with a rated residual current of 30mA or less.
3. Begin grinding your workpiece. The optimum grinding
angle is 10-15
°
to the workpiece. Do not apply excessive
pressure. Allow the tool to do the work. This will prevent
deep gouging.
1. To turn the grinder on, first push safety lock off switch
forward (a), then depress trigger switch (b). Hold the
trigger switch in this position for continuous use.
2. To turn the grinder off, release the trigger switch.
4. Begin cutting your
workpiece. The optimum
cutting angle is 90
°
to the
workpiece. Do not apply
excessive pressure. Allow
the tool to do the work.
Grinding
Cutting
