QUICK SETTING TABLE
SEEDING DISC
• Ø5.5 mm hole diameter
• Round mixer
• Preferably 36 holes
We recommend, to set your machine to the following values for Chickpea seed.
CHICKPEA SEEDS (Small Size 6-7-8 mm)
OVERFLOW PLATES
C1 plate must be removed. Only C2 plate must be attached.
Note: 1. If the flow of the seeds is not smooth then
C3 plate can be attached.
2. Machine must not be used without these plates.
Otherwise, seeds will be stuck in hopper and will damage
the nail mixers on the disc.
A SELECTOR SETTING
SELECTORS (SINGULATORS)
Outer selector handle should be
fixed to hole no. “14”
B SELECTOR SETTING
Inner selector handle should be fixed
to hole no. “9”
60
