occurrence, immediately stop all use and contact OzCharge.
Battery Charging.
Charge the product with the included USB charge cable and an
OzCharge 10W 12V power adapter. A third-party USB cable and 5W or 10W power adapter that are compatible with USB 2.0 or power adapters
compliant with one or more of the following standards EN 301489-34, IEC 62684, YD/T 1591-2009, CNS 15285, ITUL.1000. Be cautious of using
low quality power adaptors, as they may present a serious electrical risk that can result in injury to person, Device, and property. If using a third party
USB power adapter, contact the manufacturer(s) to find out if your power adapter complies with the above standards.Using damaged cables or
chargers, or charging when moisture is present, can result in electric shock. Using generic or third-party power adapter may shorten the life of your
product and cause the product to malfunction. OzCharge is not responsible for the user’s safety when using accessories or supplies that are not
approved by OzCharge. When using a USB Power Adapter to charge the product, make sure that the AC plug is fully inserted into the adapter before
you plug it into a power outlet. Power adapters may become warm during normal use, and prolonged skin contact may cause bodily injury. Always
allow adequate ventilation around power adapters when using them.To ensure maximum battery life, avoid charging your product for more than a
week at a time, as overcharging may shorten battery life. Over time, an unused product will discharge and must be recharged before use. Disconnect
the product from power sources when not in use. Use the product only for their intended purposes.
Medical Devices.
Product may emit
electromagnetic fields. Product contains magnetic components which may interfere with pacemakers, defibrilators, or other medical devises. These
electromagnetic fields may interfere with pacemakers or other medical devices. Consult with your physician prior to use if you have any medical
device including pacemakers. If you suspect the product is interfering with a medical device, stop using the product immediately and consult your
physician.
Medical Conditions.
If you have any medical condition that you believe could be affected by product, including but not limited to;
seizures, blackouts, eyestrain or headaches, consult your physician prior to use of product. The use of a integrated high-powered flashlight contains a
light sensitivity hazard. Use of the light in Strobe Mode may cause seizures in persons with photosensitive epilepsy, which may result in serious injury
or death.
Light.
Staring directly into the light beam or shine of the flashlight may result in permanent eye injury. The product is equipped with a high
output LED pre-focused lamp that emits a powerful beam at the highest setting.
Cleaning.
Power off the product before attempting any
maintenance or cleaning. Clean and dry product immediately if it comes in contact with liquid or any type of contaminant. Use a soft, lint-free
(microfiber) cloth. Avoid getting moisture in openings.
Explosive Atmospheres.
Obey all signs and instructions. Do not operate product in any
area with a potentially explosive atmosphere, including fueling areas or areas which contain chemicals or particles such as grain, dust or metal
powders.
High-Consequence Activities.
This product is not intended for use where the failure of the product could lead to injury, death or
severe environmental damage.
Radio Frequency Interference.
Product is designed, tested, and manufactured to comply with regulations
governing radio frequency emissions. Such emissions from the product can negatively affect the operation of other electronic equipment, causing
them to malfunction.
Model Number: SM-750
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
