User Manual of Ozaas Network Camera V8.1.4.3
36
Figure 7-13
【
ONVIF
】
When the IPC access to ONVIF agreement with the back-end equipment, the
need to enable ONVIF protocol; the ONVIF protocol is enabled.
【
HIK
】
When the IPC accesses the private protocol back-end device, such as the HIK
device, the HIK protocol is enabled.
【
XM
】
When the port is added, the port number is used. When entering the XM back-end
device, enable the XM protocol, and the port number uses the XM port number.
Note:
Please do not arbitrarily modify the port parameters; when there is a port conflict need to
modify the port number, please modify the following information:
HTTP and HTTPS port: use the browser login need to add the address after the port
number. If you repair HTTP port number 8555, when you use the browser login, you
need to enter
http://192.168.1.168:8555
.
RTSP port: real-time transmission protocol port, to ensure that the modified port is
available.
7.3.2 Advance Setup
In the main interface click on the "configuration
→
Network
→
Advanced Setup" to enter
the advanced configuration interface, where you can set the device DDNS, FTP, SMTP,
platform access, cloud storage and other functions.
①
DDNS
In the main interface, click "Configuration →Network → Advanced Setup → DDNS" to
enter the DDNS function settings interface, where you can open the IPC DDNS function,
select the DDNS type, enter the site name, corresponding DDNS type user name,
password, click "Save". As shown in Figure 7-14: