SCREEN BRIGHTNESS
•
The brightness adjustment menu allows you to alter the brightness of the
digital display.
• While in photo or video mode, press the"IR"button to enter the brightness
adjustment menu.
•
As shown on the right image, the number after the word "Bright" is the
current screen brightness.
•Press the"Down"button to reduce the
brightness and the up button to increase it.
There are 9 levels of brightness in total
with 9 being the brightest.
•To exit the brightness adjustment menu,
press the "IR"button twice.
BATTERY INSTALLATION
•
battery negative end first and then screw the battery cover back in place.
• Turn the monocular on, the screen will light up if the battery is inserted
correctly.
Unscrew the battery cover (using a coin in the groove if needed). Insert the
NOTES
• Only use 3.7V 14500 rechargeable battery.
• Ensure the battery has been sufficiently charged.
• Ensure battery has been inserted correctly with the negative end first.
POWER ON
• Remove the objective lens cover.
• Hold the "Power" button for 3 seconds to turn the Digital NV Monocular on.
Look through the eyecup and it is ready for use when the screen lights up and
icons are displayed.
DISPLAY ICONS
1.Battery charge indicator
2.Image capacity remaining
3.Current mode (Photo)
4.Storage media (SD card)
•
The monocular will always start
in photo mode.
1
2
3
4
POWER OFF
•
In any mode, hold the "Power" button for 3 seconds to turn the Digital NV
Monocular off.
FOCUSING
•
Remove the objective lens cover and look through the eyecup at the screen.
• Adjust the dioptre focus ring until icons on the image become sharp.
• Adjust the objective focus wheel until a desired viewing image appears.
• The infrared illuminator should be used to achieve the optimum viewing
image.
•
If the environment is bright enough, the infrared illuminator can be turned
off to save battery power.
•
Be careful not to block the infrared illuminator, as this will affect the
viewing image.
05
/
06
* Bright:7
Lamp: