USER MANUAL Model No: 4282
1.
Begin by taking the fan body (part 10) and the base stand (part 9). Slide the base stand (part 9) into the
fan body (part 10). Using part 7, screw the base stand into the fan body. Do not over tighten.
Aligning Prongs
2.
Unscrew the back fan-locking nut (part 6). Take the back fan guard (part 4) and slide onto the fan body.
Make sure the two prongs align on the fan body with the holes on the back fan guard. When aligning
the back fan guard make sure the handle is facing upwards like in the image above. Do not over tighten.
