Page
2
Manual Version:
v1.0
Model Code:
3940
Oypla.com LLP
/ www.oypla.com
Before cleaning, ensure the heater is
cool, and switched off at the mains
outlet.
Contents
1
Front Cover
-
2
Safety
Instructions
-
3
Assembly
Instructions
-
7
Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•
This product is not a toy, and is only to
be used for its designated purpose.
•
Do not make alterations or modifications
to this product.
•
Precautions should be taken to ensure
that direct contact with the heater
cannot occur.
•
The surface of the heater can become
hot during operation. To prevent
overheating, do not cover.
•
Air should be allowed to freely circulate
around the heater, to avoid it
overheating.
•
Clean only using a damp cloth. Do not
use strong industrial cleaning
substances, as these may damage the
product.
•
The tubular heater is suitable for
operation for a 230V BS Plug as shown
on the identity level.
•
Any shelving placed above the heater
must be at a distance of at least 20cm.
•
If your product is damaged or has any
defects, please contact
Warnings
Do not touch the heater whilst it is in
operation.
Never cover the tubular heater.
Do not use abrasive cleaning
powders or metal polish on any part
of the tube.
Do not allow the heater to operate for
extensive periods of time. Always keep
the heater supervised.
