Specification
Length: 1.8m
Max-towing capacity: 2000kg
DO NOT Exceed this limit
Assembly
1.
Fit the two hook sections (A&B) into the centre section (C) and secure section (A) with only pin (D).
Retain (D) pin with clip (E), Alternative pin holes are provided in the centre section for horizontal or
vertical tow eyes, so that the hooks (G & J) are always square to the eyes.
2.
Position vehicles so that the distance between the towing eyes is approximately 1.8 metres.
3.
Slide back and rotate hook (F) until secure and then fit hook (G) through vehicle towing eye. If the
eye is horizontal, the hook must have gap downwards, as shown in diagram.
4.
Push the hook gate (F) up against the tow eye and retain it in position with pin (H) and clip (E).
5.
Similarly fit and retain hook (J) to the towing eye of the second vehicle sliding section (B) into, or
out of, section (C) as necessary.
6.
Carefully move towing vehicle backwards or forwards to align pinholes in sections (B & C). Locate
with pin (D). Retain pin with clip (E).
Operating Instructions
USER MANUAL Model No: 3393
