Oxygen PERSEUS 230V, Руководство по установке

Страница: 3 / 6

SAFETY RULES
During the installation and the use of the automation, pay attention to the following safety rules:
Distance security!
Mechanisms moving!
Do not install automation in an environment saturated with explosive mixtures!
Electric Shock!
Use gloves!
Use welding glasses!
Maintain ear protection!
USE OF THE AUTOMATION
The gear motor PERSEUS was designed and built for the opening of gates with weight max. 600kg, meanwhile ARTEMIS is able to reach 800kg. OXYGEN
AUTOMATION assumes no responsibility for a purpose other than that provided by gear motor PERSEUS. Since this automation can be activated remotely
using a remote control, it is essential to check frequently that all safety devices are working properly. It is advisable to check periodically (every six months) the
adjustment of the electronic friction with which the electronic control board must be equipped.
PRELIMINARY CHECKS
– Read the instructions in the manual carefully.
– Check that the gate is perfectly horizontal
– Check that it slides smoothly and without friction points
– Check that there is an adequate base for fixing the motor, otherwise prepare it
– Check that the electrical system complies with the characteristics required by the gear motor
PRELIMINARY CHECKS
– The engine is delivered UNLOCKED
– Remove the motor from the box, check that it is not damaged. Unscrew the screws A and B and remove the cover FIG. 2
TECHNICAL DATA
PERSEUS ARTEMIS
MAX. weight of the gate 600Kg 800Kg
Power supply 220Vac 220Vac
Nominal power 190W 350W
Capacitor 8,0µF 12,5µF
Absorption 1,1A 1,5A
RPM 1400 1400
Torque 13,4Nm 21,2Nm
Gate speed 10,2m/min 10,2m/min
Thermal protection 150°C 150°C
Working temp. -20°C +60°C -20°C +60°C
Lubrication GREASE GREASE
Protection IP IP44 IP44
Use frequency 25% 35%
FIG.2