manualshive.com logo in svg

oxycom 3800OXYSTD, Руководство пользователя

Поделиться
Скачать
oxycom 3800OXYSTD Скачать руководство пользователя страница 41

Version 1.3, 2021-12-14

41

1

2

3

4

5

4

Install the IntrCooll®

4.1

Preparations

 

 

 

Warning
Wear the safety devices according to the current rules.

Warning
Ensure that no unauthorized persons are in the vicinity.

Caution
The IntrCooll® must be transported by suitable means of transport. First and
foremost, consider the permitted load capacity.
Caution
Always use the supplied pallet and the included supports when moving the
IntrCooll® horizontally with a forklift or pallet truck.
Caution
Always secure the load tightly with specially designated securing chains.
Caution
Always place the IntrCooll® on a stable loading floor with sufficient load-bearing
capacity.
Note
Oxycom is not responsible for damage resulting from incorrect transport and
storage. Warranty rights will not be accepted in the event of incorrect transport
and storage.

During transport and installation, at least wear the following protective clothing:
-

Hard helmet

-

Safety glasses

-

Safety shoes

-

Gloves

Before starting the installation procedure make sure you have read and
understood the communication requirements on page 37 for more information.

Содержание 3800OXYSTD





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды