Oxy Heli OXY4-MAX Edition 380, Инструкция по эксплуатации

Страница: 36 / 51

Chapter 19: Adjustment Servo With Leveler
Before Fly:
Now complete the setup of your FBL system. In the Accessories Bag you will find an Oxy 4 Swash Plate Leveler.
This Tool is designed to fit under the Swash Plate without disassembly any parts. This simple tool will both level the swash and give
the Zero Pitch Position.
Starting gyro gain: The Oxy 4 was designed around famous FBL Systems (IKON / Brain / mini V-Bar), and we suggest you start with
the following standard set up and adjust after test flying.
Cyclic Set Up:
Use suggested settings for 450 Helicopters and adjust after test flights.
See our table on page 6 for RPM and Pitch Settings. Cyclic Max pitch should be +/- 10.5 deg.
Tail Set Up:
Use the suggested settings for 450 Helicopters
BUT start with a LOWER Tail Gain ( Increase after test per need )
IKON / Brain = 20%
Mini V-Bar = 250 Heli suggested gain.
Lift up swash plate
as shown to have
space for inserting Leveler.
Rotate Leveler as shown Lower Swash Plate down
untill Swash Plate
touch Leveler as shown.
page 35