OXTS xOEM500, Руководство по интеграции оборудования

Страница: 14 / 24

Oxford Technical Solutions Ltd www.oxts.com Page 13 of 22
Design-in
Main connector
OxTS recommends that you mount directly to the xOEM with a connecting board using Samtec
FTSH-111-02-L-D. 5 mm space should be left between the mounting points for the xOEM and the
mounting points for the mating board to allow room for the two connectors. Alternative mating
connectors are available from Samtec or from alternative suppliers. All xOEM boardsets come with an
adapter board. This PCB will mount directly to the interconnect and houses the Ethernet RJ45 socket,
the EMI filters, a DC power socket and a 9 way d-type with a configurable pinout.
Connector pin out
Figure 8 shows the pin layout for the main connector on the xOEM. Table 7 lists the pin numbers and
their corresponding functions.
Figure 8: Connector pin layout