OXTS RT, Быстрый старт

Страница: 6 / 12

Oxford Technical Solutions Ltd www.oxts.com Page 5 of 10
Components
The components of the survey trolley are listed in Table 1.
Table 1. RT-Range Survey Trolley components
Item Qty Description
1 1 Base plate with wheels attached
2 1 Lower frame assembly with radio antenna plate attached
3 1 Upper frame assembly
4 1 Fixed PC shelf
5 3 Antenna pole sections
6 2 Joint slugs
7 12 M6 × 12 mm hex socket screws
8 12 M6 washers
9 1 UNC bolt
10 2 1" U-Bolt with plate and nuts
11 1 GPS-702-GG antenna
12 4 M4 nuts
13 4 M4 × 40 mm countersunk bolt with locking nuts
14 4 M4 washers
15 2 Bungee straps
16 1 Battery connection cable
(Not shown) 1 Battery charger
(Not shown) 1 Mains cable
(Not shown) 1 Trigger switch
Please note:
Some of these components might already be pre-assembled on delivery. Item numbers refer to the
assembly drawing in Figure 2.
An adapter plate and updated config file is required to support the RT3000 v3, to ensure a secure
mount and accuracy.
The Survey Trolley will require a battery. Please note that this is not supplied by OxTS and must be
purchased by the customer. The ideal battery is a Yuasa NP24-12, a 12 V, 24 Ah lead acid battery
measuring 166 × 175 × 125 mm.