OXTS RT, Быстрый старт

Страница: 8 / 12

Oxford Technical Solutions Ltd www.oxts.com Page 7 of 10
The RT should be set up on the Survey Trolley facing the rear and clamped down securely so it
cannot move. The installation on the Survey Trolley is shown in Figure 3.
Figure 3. Survey Trolley installation
An iron plate is provided to hold the magnetic antenna for the radio modem.
The connections for the RT on the Survey Trolley are the same as those on a vehicle and are shown
in Figure 4.
If a trigger switch is being used, then it should be connected to J5 of the RT. A trigger event can be
made by shorting the Event Input pin on J5 of the 14C0038A User Cable to ground. The trigger event
can be used to place a point in the line file for the map. A switch is provided with the Survey Trolley
with a pre-wired connector that fits on J5.