manualshive.com logo in svg

OXTS GPS-Base, Руководство пользователя

Поделиться
Скачать
OXTS GPS-Base Скачать руководство пользователя страница 23

GPS-Base User Manual

 

 

Revision: 131025 

 

23 

 

Table 7. Description of the status parameters 

Value 

Description 

Not Connected 

The GPS-Base software cannot find a GPS-Base to communicate with on the 
selected port. Return to the Connection page to select a different port or 
connect a GPS-Base to the computer. 

Averaging 

The GPS-Base is averaging the GPS positions. 

RTCA OK 

This is the normal mode for the GPS-Base when it is working correctly and 
outputting RTCA corrections. 

RTCA2 OK 

This is the normal mode for the GPS-Base when it is working correctly and 
outputting RTCA2 corrections. 

RTCMV3 OK 

This is the normal mode for the GPS-Base when it is working correctly and 
outputting RTCM V3 corrections. 

Idle 

The GPS-Base is idle. To change from this mode the GPS-Base needs to know 
the position of the GPS antenna. Return to the Configuration page to set the 
location of the GPS antenna. 

Interrogating 

In this mode the software is trying to communicate and establish the mode of 
the GPS-Base. This mode should not last long. 

Integrity Warning 

This occurs when the GPS receiver disagrees with the position that is being 
used. Check that the antenna location corresponds to the position that has been 
entered or that the file used to save the GPS antenna location is correct. 

Error 

There is some error. It is probably best to restart the software and the GPS-
Base. 

 

Communication 

The Communication value will change to show that the computer and the GPS-Base are 
communicating. In normal operation none of the other values change and this field is 
useful to show that the GPS-Base is still communicating correctly. 

Latitude, longitude, altitude 

These measurements show the location that the GPS-Base believes the antenna is at. 

Base Station ID 

This field shows the Base Station ID that the GPS-Base is currently transmitting. When 
this is blank then no ID has been set. 

Logging Novatel binary 

If the software is configured to log Novatel binary data to disk (for use with GPS post-
processing software) then the value will show the size of the file. Otherwise, if logging 
is not active, it will show “Off”. 

Содержание GPS-Base

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды