User Instruction -
JORAN
V1
03/2017
4/6
Rear panel
Risk Of Electric Shock
Ne Pas Ouvrir. Risque De Choc Electrique
Warning : This Unit Must Be Grounded
1=Ground; 2=Data-; 3=Data+
Made in P.R.C.
1. DMX output socket
Connect DMX input socket of next unit for parallel
2. DMX input socket
Connect DMX input signals
3. Output port (x6)
Connects 6 channel output
4. Power in
Connects Power Source
4. Operation
• Please confirm power requirement is matched with that specified on this unit.
• Apply required control signals.
• Check for proper wire connections, turn power switch ON.
• Allow the system to connect available control signal at a time, the prevailing one should
control channel output.
• Curve selection
Set dip switch 10 to ON, the curve type is square.
Set dip switch 10 of OFF, the curve type is linear.
• Initial DMX address setting, please refer to following table.
Содержание JORAN
Страница 6: ......
