User Manual -
Funstrip 2R
V1
03/2017
4/10
Attention:
Do not attach more than 4 Funstrip DMX using the holes provided plates, suspended on the
two attachment points higher (insert M10).
Please note once this unit is for hancing application, it required to use a safety rope (sold
separately, this safety rope can hold at least 10 times the weight of fixture) to ensure the
mounting safety of the fixture by attached through the holder.
Power:
Before plugging your unit in, be sure the ressource voltage in your area matches the unit re-
quired voltage. The unit is available in a 230V version only. Because the line voltage may vary
from venue to venue, you should be sure to plug the socket into a matching wall outlet before
attempting to operate your unit.
Fuses:
The «Funstrip DMX» electric system is protected by F6.3A250V 5*20mm. Please see the prin-
ting on the case and these fuses prevent you from overloading damaging your unit. To replace
the protective fuse, use a flat head screwdriver to unscrew the fuse holder. Pull out the old
fuse and replace it with a new one. Insert the fuse back into the slot and tighten. Always re-
place with exact same type fuse removed unless otherwise specified by an authorized service
technician.
4. Overview
DMX OUT
POWER THRU:
AC 230V~50/60Hz, MAX 20A.
FUSE
DMX IN
POWER
Made in P. R.C
POWER INPUT:
AC 230V~50/60Hz, MAX 20A.
NE PAS OUVRIR... RISQUE DE CHOC ELECTRIQUE
WARNING:
THIS PRODUCT MUST BE EARTHED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
POWER CONS : 800W
FUSE : F6.3A 250V 5x20mm
LAMP: GU10 75W-240V
Safety chain/cord
attachment point
Very hot lamp . Wait at least 15 minutes, before opening.
Looser 4 screws for lamp replacement .
Maximum surface temperature: 100 C
Minimum safety distance to flammable materials: 0.3 m
CAUTION!
1
7
2
8
11
12
3 4 5 6
9
10
DMX OUT
POWER THRU:
AC 230V~50/60Hz, MAX 20A.
FUSE
DMX IN
POWER
Made in P. R.C
POWER INPUT:
AC 230V~50/60Hz, MAX 20A.
NE PAS OUVRIR... RISQUE DE CHOC ELECTRIQUE
WARNING:
THIS PRODUCT MUST BE EARTHED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
POWER CONS : 800W
FUSE : F6.3A 250V 5x20mm
LAMP: GU10 75W-240V
Safety chain/cord
attachment point
Very hot lamp . Wait at least 15 minutes, before opening.
Looser 4 screws for lamp replacement .
Maximum surface temperature: 100 C
Minimum safety distance to flammable materials: 0.3 m
CAUTION!
1
7
2
8
11
12
3 4 5 6
9
10
1.Lamp
10*Gu10 230V/50W
2. LED Display
This multi-function display will detail all DMX Adress, Chase, Program,
Speed activity that pertains to the current operation mode of the unit.
Содержание FUNSTRIP 2R
Страница 10: ......