Oxgard MODELK-14, Руководство по эксплуатации

Страница: 10 / 32

ВЗР.248100.000OM
Gate K-14 Operation Manual
10
INSTALL THE POWER SUPPLY MODULE INSIDE THE PRODUCT BODY
AS IT MAY RESULT IN ELECTRIC SHOCK TO PERSONS.
INSTALL THE PRODUCT OUTSIDE DRY AND HEATED ROOMS.
OBSTRUCT OR ACCELERATE THE PRODUCT FLAP MOVEMENT
WHEN TURNING ON (OFF) THE ANTI-PANIC MODE.
APPLY PASTES AND LIQUIDS CHEMICALLY AGGRESSIVE TO
MATERIALS OF THE HOUSING WHEN CLEANING THE PRODUCT.
2.2 Preparing the product for use
2.2.1 Safety measures during product preparation
ATTENTION: TO AVOID INJURIES TO PERSONS AND PRODUCT
BLOCKING, MAKE SURE THAT THERE ARE NO PERSONS AND FOREIGN
OBJECTS WITHIN THE FLAP ROTATION AREA PRIOR TO THE PRODUCT
CONNECTION.
2.2.2 Rules and procedures for visual inspection of the product
Visual inspection of the product before connecting to the mains shall be
obligatory and include:
1)
check for product housing mechanical damage: cracks, through holes resulted
from fasteners drop-out;
2)
thorough inspection of all connections of the product.
2.2.3 Turning on the product.
Connect the PSU to ~220 volts mains and turn it on. When turned on, the
indication panel lights in yellow-green, calibration takes place. The product flap